Planta Purificadora De Agua RO/UF System for Industrial Oil Separator CPI Corrugated Plate Interceptor

• After-sales Service: Yes
• Warranty: 1year
• Type: Membrane
• Model NO.: RO-1
• Method: Chemical Treatment
• Usage: Industrial, Municipal Wastewater
• Product Mode: Lpo2-4040
• Stable Desali- Nation Rate (%): 99.3
• Permeate Flow Rate Gpd (M³/D): 2600(9.8)
• Test Pressure Psi(MPa): 150(10.3)
• Membrane Aera: 103(9.6)
• Transport Package: Standard Package
• Specification: LPO2-4040
• Trademark: DUBHE
• Origin: China
• HS Code: 84212990
• Package Size: 100.00cm * 20.00cm * 20.00cm
• Package Gross Weight: 2.000kg

Product Description

Product Introduction

Ultra-Low Pressure Spiral Wound Polyamide Composite Membrane Element
Achieves high water production and quality equivalent to standard low-pressure membranes under extremely low operating pressure, significantly reducing customer operational costs.
Utilizes specially treated membrane sheets with stable performance, lowering customer equipment maintenance and operational expenses.

APPLICATION

Suitable for desalination and advanced treatment of brackish water, surface water, and tap water with a salinity of approximately 1500 ppm or less, such as small commercial water purifiers, hospital and laboratory water purification equipment, etc.

Operating and Cleaning Limits:

1. Flow rate and salt rejection are based on the following test conditions: 1500 ppm NaCl solution, 77ºF (25ºC), pH: 7.5, 15% recovery rate, and the rated applied test pressure mentioned above.
2. The minimum salt rejection rate is 99.0%.
3. The flow rate of a single element may vary within a range of ±15%.

Maximum Operating Temperature: 113 °F (45 °C)
Maximum Operating Pressure: 600 psi (4.14 MPa)
pH Range, Continuous Operation: 3-10
Maximum Feed Silt Density Index (SDI): < 5
Maximum Feed Flow Rate: 16 gpm (3.6 m³/h)
Chlorine Tolerance: < 0.1 ppm

Notes:
a. The maximum temperature for continuous operation at pH above 10 is 95 °F (35 °C).
b. Under certain conditions, free chlorine and other oxidizing agents may cause premature membrane failure. Since damage from oxidation is not covered under warranty, it is recommended that customers remove residual chlorine through pretreatment prior to membrane contact.

Technical Specifications

Membrane type	Membrane Model	Stable Salt Rejection%	Minimum Salt Rejection%	Average Water ProductionGDP(M^3/d)	Membrane area ft^2(m^2)	Feed Spacer (mil)	Test condition
							Test Pressure psi(bar)	Test Solution Concentration  nacl(ppm)	Recovery Rate%
Ultra-Low Pressure Reverse Osmosis	ECO1-8040	99.0	98.5	10500(39.7)	400(37.2)	28	100(6.9)	500	15
	ECO1-4040	99.0	98.5	2600(9.8)	93(8.6)	28
	ECO2-8040	99.0	98.5	11000(41.6)	440(41.0)	28
	ECO2-4040	99.0	98.5	2800(10.5)	103(9.6)	28
Ultra-Low Pressure Reverse Osmosis	LPO1-8040	99.3	99.0	11000(41.6)	400(37.2)	32	150(10.3)	1500	15
	LPO2-8040	99.3	99.0	11500(43.5)	420(39.0)	30
	LPO3-8040	99.3	99.0	12000(45.4)	440(41.0)	28
	LPO1-4040	99.3	99.0	2500(9.5)	93(8.6)	28
	LPO2-4040	99.3	99.0	2600(9.8)	103(9.6)	28
	LPO1-8040HR	99.5	99.3	10000(37.8)	400(37.2)	32
	LPO2-8040HR	99.5	99.3	10500(39.7)	420(39.0)	30
	LPO3-8040HR	99.5	99.3	11000(41.6)	440(41.0)	28
Low-Pressure (Brackish Water) Reverse Osmosis Membrane	PRO1-8040	99.5	99.3	10500(39.7)	400(37.2)	32	225(15.5)	2000	15
	PRO2-8040	99.5	99.3	11000(41.6)	420(39.0)	30
	PRO3-8040	99.5	99.3	11500(43.5)	440(41.0)	28
	PRO1-4040	99.5	99.3	2500(9.5)	93(8.6)	28
	PRO2-4040	99.5	99.3	2600(9.8)	103(9.6)	28
Low-Pressure (Brackish Water) High-Rejection Reverse Osmosis Membrane	PRO1-8040HR	99.7	99.5	9500(36.0)	400(37.2)	32
	PRO2-8040HR	99.7	99.5	10000(37.8)	420(39.0)	30
	PRO3-8040HR	99.7	99.5	10500(39.7)	440(41.0)	28
	PRO1-4040HR	99.7	99.5	2000(7.6)	93(8.6)	28
	PRO2-4040HR	99.7	99.5	2100(8.1)	103(9.6)	28

Company Profile

SHANGHAI DUBHE ENVIRONMENTAL PROTECTION & TECHNOLOGY CO., LTD is a leading wastewater treatment solutions provider with 20+ years of expertise. Specializing in durable, energy-efficient, and cost-effective systems, we serves global clients while adhering to strict quality standards, including ISO 14001:2015 certification. Our company ensures optimal performance and sustainability, making it a trusted partner in environmental protection.

FAQ

Q: Do you provide after-sales service overseas?
A: Yes, we have partnered service centers in key regions.

Q: What documents do you provide for export?
A: Full export package (Commercial Invoice, Packing List, Bill of Lading, COC, etc.).

Q: How do I place an order?
A: Contact us via email/phone for a quote, then confirm with a PO.